Blog de la compañía Mingjiada Supplies Infineon IGBT Discrete Devices (TRENCHSTOP IGBT7/5) for Solar Inverters and Uninterruptible Power Supply Applications

Dedicated to Solar Converters and UPS (Uninterruptible Power Supply) Systems: Infineon IGBT Discrete Devices (Complete Overview of Models Available from Mingjiada)

Application Scenarios and IGBT Technical Requirements

Solar converters (photovoltaic inverters) and UPS (uninterruptible power supply) systems are currently the two fastest-growing application markets in the power electronics sector. Both types of system share highly consistent core requirements for power switching devices: high conversion efficiency, low conduction losses, excellent thermal stability and long-term reliability.

Solar photovoltaic inverters need to minimise losses during the DC-AC conversion process to enhance the system’s power generation efficiency. Single-phase string inverters typically require IGBTs with a voltage rating of 650 V to 1,200 V and a switching frequency ranging from 15 kHz to 120 kHz, whilst also demanding extremely low saturation voltage drops and switching losses. Uninterruptible power supplies (UPS) place additional demands on the dynamic response speed and short-circuit withstand capability of the devices; in particular, during the instantaneous transition from mains power to battery power, IGBTs must withstand significant current surges.

Infineon’s TRENCHSTOP™ series of IGBTs utilises ultra-thin trench gate field-stop technology to achieve a precise balance between on-state and switching losses, and has become the benchmark choice for the aforementioned application areas.

Mingjiada’s range of discrete IGBT devices from Infineon

Shenzhen Mingjiada Electronics Co., Ltd. has long supplied Infineon IGBT transistors, covering multiple series such as IKW, IKZ, IKY and IKA, with package types including TO-247, TO-247PLUS, TO-220 FullPAK, D²PAK and TO263-7. The complete range of models available from Mingjiada, listed by application, is set out below.

I. Models suitable for solar converters (photovoltaic inverters)

TRENCHSTOP™ IGBT7 H7 1200V Series

This series is specifically designed for 1100V string-type photovoltaic inverters, featuring a maximum junction temperature of 175°C, low saturation voltage drop and excellent resistance to moisture. Mingjiada can supply the following complete range of models:

IKW15N120CS7 — 1200V/15A, TO-247 package

IKW40N120CH7 — 1200V/40A, TO-247 package, H7 hard-switching series, suitable for single-phase string inverters and photovoltaic applications

IKW50N120CH7 — 1200V/50A, TO-247 package

IKW75N120CH7 — 1200V/75A, TO-247 package

IKY100N120CH7 — 1200V/100A, TO-247PLUS package

IKY120N120CH7 — 1200V/120A, TO-247PLUS package

IKY140N120CH7 — 1200V/140A, TO-247PLUS package

TRENCHSTOP™ 5 H5/F5 Series (650V)

This series is designed for the MPPT boost stage and DC-AC inverter stage in photovoltaic inverters, with a switching frequency range of 15 kHz to 120 kHz, offering a balance of high efficiency and high power density:

IKW40N65H5 — 650 V/40 A, TO-247 package, with RAPID 1 fast soft anti-parallel diode

IKW50N65H5 — 650V/50A, TO-247 package

IKW75N65EH5 — 650V/75A, TO-247 package, H5 series

IKFW50N65EH5 — 650V/50A, TO-247 advanced isolation package, no additional insulation material required

IKFW75N65ES5 — 650V/75A, TO-247 advanced isolation package, S5 series, suitable for switching frequencies of 10kHz–40kHz

IGW50N60TP — 600V/50A, TO-247 package, TRENCHSTOP™ high-performance series

TRENCHSTOP™ 5 S5 series

IKZA50N65SS5 — CoolSiC™ hybrid discrete device, combining an IGBT with a sixth-generation CoolSiC™ diode; suitable for PV string inverters and energy storage systems, offering both the fast recovery characteristics of SiC diodes and the cost advantages of IGBTs.

II. Models Suitable for Uninterruptible Power Supplies (UPS)

IGBT requirements for UPS applications focus on low saturation voltage drop, low switching losses and good EMI performance. Mingjiada can supply the following core models:

TRENCHSTOP™ IGBT7 H7 650V/1200V Series

IKW40N120CH7 — 1200V/40A, TO-247 package, directly compatible with high-frequency transformer topologies in offline UPS systems

IKW75N65ET7 — 650V/75A, TO-247 package, with built-in EC7 soft diode, maintaining excellent EMI control whilst achieving lower switching losses than previous-generation technology

IKQ150N65EH7 — 650V/150A, TO247PLUS-3 package, developed for green and highly efficient energy applications, suitable for high-power UPS systems

TRENCHSTOP™ 5 Series

AIKBE40N65RF5 — Automotive-grade 650V/40A, PG-TO263-7 surface-mount package, TRENCHSTOP™ 5 F5 series; integrates a high-speed switching IGBT with a fast soft-recovery anti-parallel diode in a single package; suitable for UPS, solar systems and energy storage applications

IKA15N60T — 600V/15A, TO-220 FullPAK package, with anti-parallel diode, suitable for small to medium-power UPS and industrial power supplies

IGW20N60H3 — 600V/20A, TO-247 package, high-speed 600V IGBT, suitable for UPS and industrial switching power supplies

TRENCHSTOP™ 1200V H3 Series

IKW40N120H3 — 1200V/40A, TO-247 package, classic high-speed series, suitable for UPS and solar systems

III. DTO247 High-Current Series (General-purpose for solar, UPS and energy storage)

Infineon’s 750V TRENCHSTOP™ IGBT7 H7 DTO247 discrete transistors feature a package size twice that of the standard TO-247, enabling them to replace multiple low-current TO-247 IGBTs connected in parallel, thereby simplifying parallel circuit design and reducing system complexity. With rated currents ranging from 200A to 350A, this series is specifically designed for high-current solar inverters, UPS systems and energy storage systems.

Selection Guidelines and Supply Information

In the two application categories mentioned above, the 650V-rated IGBTs are primarily intended for the MPPT stage of photovoltaic inverters and the PFC/inverter stages of small-to-medium-power UPS systems, whilst the 1200V-rated IGBTs are suitable for the power conversion stages of 1100V DC bus photovoltaic systems and three-phase UPS systems. Compared to the previous-generation 5 Series, the TRENCHSTOP™ IGBT 7 Series offers lower saturation voltage drops and superior high-temperature performance at the same current rating, making it suitable for new designs with higher requirements for efficiency and power density.

Mingjiada Electronics supplies all the above models through 100% genuine, original channels, with over 2 million models in stock at all times. We support sample requests, small-batch trial production and long-term contract orders, whilst our dual warehousing in Shenzhen and Hong Kong ensures rapid delivery. For specific pricing or stock information on individual models, please contact Mingjiada Electronics directly.

Contact details:

Tel: +86 13410018555 (Mr Chen)

Email: sales@hkmjd.com

Address: Rooms 1239–1241, New Asia Guoli Building, Zhenzhong Road, Futian District, Shenzhen

Website: www.integrated-ic.com